How To Use A Ryobi Router Table |

How To Use A Ryobi Router Table

Router tables are a utility tool to cut moldings. They double the effect of the router. Since a router table negates the necessity of clamps, so it makes carpenters’ and artisans’ jobs easy. In fact, according to Alex Rice, a professional woodwork man, 80% of the router needs a router table to get their work done.

How To Use A Ryobi Router Table

In this case, the Ryobi router table successfully holds the reputation of being the most popular router table used by professionals in molding and cutting jobs. However, many amateurs tended to get bogged down and perplexed during their first-time use of the Ryobi router table.

What’s more, many neglects the essential safety issues. But, there’s nothing to worry about since this detailed instruction on how to use a Ryobi router table will cover all possible areas to use the router table comfortably, and with safety,

An Easy and Safe Method to Use a Ryobi Router Table

Ryobi router tables come with a built-in adjustable surrounding fence that has the joining feature. The tabletop is laminated with high-quality MDF faced towards the barriers. However, with little care and precaution, a Ryobi router table is bound to serve for years.

So, let’s have a look at an in-depth, user-friendly guideline of this essential toolkit.

  1. Easy End Grain Routing

Molding end grains with a Ryobi router table and a push back is commendable than using a handheld router . It has three major advantages-

  1. The fence instructs the cutting line, so the user won’t have to rely on the bearing guided line.
  2. Both narrow and wide cutting is possible with the Ryobi table.
  3. The push block eliminates the chances of tearing up and chipping during the cuts.

To use the router table for the end grain cutting, you will have to follow the below guideline.

  • At first, screw the square handle (preferably 10X10 inch) with the grip (2X2 inch).
  • It will help if you press the wood board against the wood square with a specific strength.
  • Thirdly, push the workpiece into the bit.
  • Apply moderate pressure on the workpiece against the router table fence throughout the working time. It will help you to hold the square push blocks close to the fence and ease out your task.

Successful application of these instructions will give you precise end grain cutting. However, you need to use the squared push block wisely to provide support for the workpiece during your cutting time.

2.Creating Individual Moldings

Ryobi router tables are great for creating frames that suit your particular needs. The router table makes it a more effortless and less time-consuming task. It is easy to handle and operate which is seriously helpful for most amateur users.

However, you need to safeguard your fingers as you use the Ryobi router table to create the original moldings. You would require push sticks and a feather board to do so.

The process is as following-

Shaping the board edge:

  • Apply medium to moderate pressure by clamping the tabletop and board together.
  • The board should be fed at a standard rate.
  • The notch should be hooked with the board with a push stick.

Preparing the router table:

  • At first, tighten the bit of the router table
  • Then adjust the height as you mount the router to its base.
  • Now, place the bearing guide (if your model has one) in a position so that there isn’t more than a thin space between the straightedge and the bearing guide outside edge.

Now, allow the saw to feed the board at standard speed to avoid any burning mark on the workpiece and strain on the router.

Tips: Moldings don’t require a square push, so you need not worry about it.

3.Creating Straightedge on the Plywood or Board

Although making straightedges with the router table on the board and plywood is a time-consuming task, it will provide you with the perfect edge. So, it’s worth the time one invests.

Setting the fence

  • At first, you should shim out the left side of the fence. You can do it using either laminated plastic or a cupboard.
  • Now place a straight piece of board against the newly shimmed left half of the fence. It should lay against the bit of the router.
  • Adjust the bit so that it touches the straightedge only just.

Start the original cuts

  • Before you begin to cut your unique piece of board, test the setup with the help of scrap wood or board.
  • The plane board should glide smoothly against the adjusted board and the left half of the fence. It indicates that the setup is perfect, and you can start your original work.
  • Nonetheless, if the board frequently touches the shimmed left half of the fence, adjust it by moving slightly.
  • With the setup ready, you can do a variety of jobs- planning the plywood edge, removing saw marks, and straightening the board edges.

4.Creating Pivotal Joints

Well, many would be surprised to see such innovative use of the Ryobi router table . However, despite people’s unawareness, you can use the Ryobi router table as a jointer. It is a money-saving alternative to a dedicated pivotal jointer.

  • Use a freehand routing for the preset piloted bits.
  • Apply standard pressure so that the bits and the pivot are engaged closely for cutting jobs.
  • You should maneuver the pivot at standard speed clockwise, aka from right to left direction.

Note: To shape the edges of small pieces, use a bearing guide for secured and desired performance.

Safety Tips for Using a Ryobi Router Table

  1. During the time of changing bits, make sure that the router is disconnected.
  2. If possible, hide the bit with a guard.
  3. We recommend you wear protective glasses, a hearing aid and safety gloves.
  4. Use a push stick to keep your fingers safe.

How To Use A Ryobi Router Table – Details with Video


Ryobi router table will free you from the hassle of using a clamp to secure your workpiece. It’s easy adjustable bit and slot allows you to plane the plywood, timber, or board with more control and comfort. This guideline should be sufficient to make you realize the ins and outs of the user guideline of a Ryobi router table to get your desired result.

Leave a Comment